FlexAlert from Trumeter, the Perfect Universal Small-form Countdown Timer

The FlexAlert is a lightweight, small-form Countdown Timer range that can be used in a wide variety of applications where a countdown and reminder notification is required. This capable range of timers can be easily attached in the location required where they can be left to count down to the pre-set duration. When the allocated time-period has been reached the timer will produce an audible alert warning users that attention is required within a specific process or application, which will continue until it has been turned off. Typically, this alert will run for a minimum of 60 days until the timer has been reset so there can be no excuses!

Ideal for Service Intervals

The FlexAlert’s flexibility and versatility make it an ideal unit for domestic and industrial uses, suitable for a wide variety of applications that require interval notifications such as service intervals and equipment checks as well as reviews and component changes. Designed to be tamper resistant, the time interval is pre-set by design and requires the use of a screwdriver to access the battery reset function. Dependable, the FlexAlert range of small-form countdown timers ensures that those important activities are carried out on time, every time.

Compact and lightweight in design, only 40 mm in diameter and a tiny 60 grams in weight, this versatile range of countdown timers are small and discrete enough to be placed just about anywhere. Available with a wide range of standard options there is a countdown timing alert solution readily available straight out of the box.


FlexAlert Models Available:

View the Range at Kempston Controls


Easy to Install, Simple to use

Cable tie and hook and loop mounting fixtures help ease installation and the FlexAlert range is simple to use as well, just place one timer with a specified countdown interval in the location desired, pull the battery insulation tab free to start the timer and go. Suitable for use just about anywhere without making changes to an installation with their unobtrusive and sleek design

 

 

FlexAlert Countdown Timer Specifications

  • Timer Type – Alert Timer, audible beep, minimum 60 days until reset
  • Alert amplitude – >50 dB A
  • Manual Reset function
  • Unobtrusive design
  • Uses readily available CR2032 Battery (1000 days typical life)
  • Supplied with hook and loop adhesive pad and 200 mm cable tie
  • Protection rating – IP30
  • Dimensions 39.7 x 18.3 mm (16 mm deep without fixing pad)
  • Operating temperature -10 to + 60 ° C
  • Storage temperature -20 to + 70 ° C
  • Weight – 16 grams
  • White in colour
  • Design life – 10 years

Powered by the common CR2032 battery (with a typical life of 1000 days) that ensures you will never be searching for expensive hard-to-source batteries on a regular basis. Whatever you countdown timing application requirements the Trumeter FlexAlert range is here to help you achieve your goals. The FlexAlert can also be customised to meet your applications requirements with options including countdown timer duration and customer branding, speak to Kempston Controls for availability.

Have you read these?

Feeling the Pinch (valves)

Easy Temperature Control

 


 

The Wireless Alert Sensor Range from Lascar Expands!

Lascar have expanded their Wireless Alert Range with the addition of three exciting Wi-Fi enable sensor products. These capable wireless devices offer even more flexibility when it comes to remote sensing across a wide variety of industrial, commercial and domestic applications.

The Wireless Alert LD – Leak Detection

The Wireless Alert LD

The Wi-Fi-connected Wireless Alert LD detects localised leaks or flooding and sends email alerts, using the free ‘FilesThruTheAir’ mobile app (available in the Google Play and the App Store) to a user-selected email address. Once installed the Wireless Alert LD will send and alert when the probe detects the presence of fluid between the sensor contacts, allowing users to take corrective action.

This affordable product is ideal for a wide array of applications where a water leak, or localised flooding could, for example, seriously compromise and damage a valuable piece of equipment or property. Ideal for installation in kitchens, cellars/sumps, public bathroom, chilled storage, water tank overflow, etc.

Wireless Alert LD Features:

  • Leak detection sensor with 1.5 m cable
  • Wi-Fi connected, customisable email alert messages
  • Alert delay settings to prevent unwanted alerts
  • Simple to set up using the free mobile app
  • Two years’ battery life (typical) – 2×1.5V AAA included
  • No ongoing subscription fees
  • Includes sticky pad for wall mounting

Learn More

The Wireless Alert CM – Contact Monitor

The Wireless Alert CM

The Wi-Fi-connected Wireless Alert CM will remotely notify users via email when it detects a volt-free contact has changed state, using the same FilesThruTheAir mobile app as mentioned earlier. Configurable settings include, device name, alert notification message content, alert delay and Wi-Fi network connection. The Alert CM is ideal for monitoring relay contacts, float switches, door contacts, push buttons or any electronic system with a volt-free contact output.

Wireless Alert CM Features:

  • User-configurable alerts for contact open, closed or both, 1.5 m cable
  • Alert delay settings to prevent unwanted alerts
  • Customisable alert messages
  • Sends email alerts and scheduled status reports
  • Wi-Fi connected, WPA/WPA-2 Personal – 802.11bgn
  • Simple to set up using the free mobile app
  • Two years’ battery life (typical) – 2×1.5V AAA included
  • No ongoing subscription fees
  • Includes sticky pad for mounting

Learn More

The Wireless Alert TP-P – Pipe Temperature Sensor

The Wireless Alert TP-P

With a temperature range of -40 to +120°C and a probe complete with a 1.5m cable, the Wireless Alert TP-P will remotely notify users via email (using the FilesThruTheAir mobile app) when the pipe probe detects that the temperature of a pipe is outside of those defined in the user-selected limits.

Configurable settings of the Alert TP-P include, device name, temperature alert limits, alert notification message content and WiFi network connection. The perfect and affordable pipe temperature monitoring solution for countless industrial, commercial and domestic applications.

Wireless Alert TP-P Features:

  • -40 to +120°C temperature probe with 1.5 m cable,  IP65
  • User-configurable high and low temperature limits
  • Sends email alerts and scheduled status reports
  • Flashing alert indicator
  • Wi-Fi connected, WPA/WPA-2 Personal – 802.11bgn
  • Simple to set up using the free mobile app
  • Two years’ battery life (typical) – 2×1.5V AAA included
  • No ongoing subscription fees
  • Includes sticky pad for wall mounting

Learn More

 

Kempston Controls are the people to speak to when it comes to finding your ideal Lascar Wireless Sensor solution. Call us today on +44 (0) 1933 411 411, or email sales at sales@kempstoncontrols.co.uk, or alternatively use the enquiry form below and let us help find the perfect sensor for you.

 

Have you read these?

Food Storage Temp Monitoring

Capacitive Sensors

 

Kempston Controls