Battery Storage Fuse Links– Protecting the Power

The demand for electrical power is continually increasing and traditional methods of energy production, such as nuclear, Hydroelectric and coal-fired power stations have been supported by growth of renewable energy technology such as wind, solar and tidal power. As countries all around the world are striving to become more reliant upon efficient and environmentally friendly electrical energy the requirements to store the energy generated by renewable and more traditional methods within battery storage systems is rapidly becoming a necessity.

Modern storage

Modern battery storage systems are modular, easy to deploy close to power generation networks and can even be retrofitted into existing systems. The batteries contained within these power banks can contain Lead Acid, lithium-ion, AGM and NiCad and any installation will feature a Battery Management System (BMS) to ensure good battery health, ensuring the batteries cannot be overcharged or over-discharged. The BMS, together with high-quality Battery Storage Fuses are designed to provide the battery storage installation with protection from dangerous overcurrents and short circuits.

The expansion of this power storage network is having a demanding effect on electrical system architecture and as a consequence their overcurrent protection needs. Battery storage system protection requirements differ compared to typical grid-connected AC systems, here they are required to operate with DC systems which may have high fault currents and a number of lower overcurrent instances.

The forefront of design

Eaton has been at the forefront of this drive, continually innovating and making sure battery storage systems for schools, offices, shopping centres and large scale utility storage systems operate safely. With their extensive knowledge and experience behind them, Eaton has created a range of Bussmann Battery Storage Fuse Links that are have been specifically designed and tested to safely protect battery storage systems with high DC voltages and low fault currents.

Battery Storage Fuses

The BSF-NH Range of Fuse Links

Eaton Bussmann’s BSF-NH series of Battery Storage Fuse Links have been specifically designed to isolate and protect battery array combiners and disconnects. The BSF-NH range is capable of interrupting low overcurrents that are associated with faulted battery storage systems. Available in bolted tag or bladed fuse link versions.

A range of associated fuse bases available in  SD1 (250 A), SD2 (400 A) and SD3 (630 A) sizes and shroud kits, fuse extractors, microswitches, neutral links and phase barrier kits suitable for the BSF-NH range of Battery Storage Fuse Links are available to help complete your installation.

BSF-NH Fuse Technical Data

Voltage rating 1000 Vdc

Current rating 63 to 400 A

Breaking capacity 100 kA

Time constant 4.5 ms t 100 kA

Compact design

Low power loss

Fuse sizes – NH1 (63-160 A), NH2 (160-250 A), NH3 (315-400 A)

Operating class – gBat proposed for full range fuse links for the protection of battery systems

Standards IEC 60269-7, RoHS and REACH compliant

Download the datasheet

 

The BSF-3XL Range of Fuse Links

Battery Storage Fuse 3XL

 

Designed for more demanding tasks, the BSF-3XL range of Battery Storage Fuse Links have been designed to isolate and protect high-power battery array combiners and disconnects. The BSF-3XL range is capable of interrupting low overcurrents that are associated with faulted battery storage systems.

Available in bolted tag or bladed fuse link versions. A fuse base (SD3L-S-PV) for knife bladed terminal fuse links and microswitches for the BSF-3XL range of Battery Storage Fuse Links are available to help complete your installation.

 

 

 

BSF-3XL Fuse Technical Data

Voltage rating 1500 Vdc

Current rating 250 to 500 A

Breaking capacity 100 kA

Time constant 4.5 ms t 100 kA

Fuse sizes – 3L

Operating class – gBat proposed for full range fuse links for the protection of battery systems

Standards IEC 60269-7, RoHS and REACH compliant

Download the datasheet

 

If you are installing a Battery Storage System you will need to ensure that you have the right Fuse Links and accessories for the job. Kempston Controls, as a supplier partner for Eaton, has access to the entire Eaton Bussmann range of Battery Storage Fuse Links and we can provide you with all the assistance you need to help you choose the right products. Give our sales team a call on +44 (0) 1933 411411 or email them at sales@kemsptoncontrols.co.uk to discuss your Battery Storage Fuse Link requirements.

Have you read these articles?

Surge Protection

Switching Power

Kempston Controls


Kempston Controls is committed to finding you the ideal solution for your application. Call us today on +44 (0) 1933 411 411, email us at sales@kempstoncontrols.co.uk, or alternatively contact us here, we will be happy to help.

Kempston Controls

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>